Feature Overview:
-
Laser Power real 10 - 22W RGB or single color green
-
HighEnd graphic galvo scanners from CTi
-
Air sealed optical section, no contamination of
optical surfaces
-
Very high efficiency of optical elements
-
Premium class lasers "Coherent Taipan"
-
Digital switching power supplies
-
Fully compatible ILDA connector
-
DMX controllable memory inside
-
NetPort LAN Interface for full digital control
PowerMaXX HPL projectors - built for
the big things in life!
The new PowerMaXX HPL show laser projector targets the high
end laser show market, with a tremendous quality and reliability. As all
MediaLas projectors, the PowerMaXX is entirely designed, produced and assembled
in Germany. Based on the new Coherent Taipan OPSL lasers, the PowerMaXX HPL
offers an incredible beam quality and color matching. All PowerMaXX projectors
offer a fully compatible ILDA interface connector, plus a full IEC scanfail
safety board. Through the LAN interface, a full digital control is also
available, which eliminates analog influences or noise.
The PowerMaXX HPL uses superior optical elements for low
power losses and better efficiency. Since the sophisticated heat exchanger
eliminates flooding of the optical section with dirty air, the PowerMaXX offers
much better performances in both aspects: Good optical efficiency for higher
brightness, and no air flow through the optical section. Therefore, the
PowerMaXX can also be set up in dirty or humid environments.
All PowerMaXX HPL projectors do not require a regular
service, and offer further productive features. High End laser deflection
systems allow professional, and flicker free graphics with high resolution and
precision. Targeting mirrors is easy!
Control and interface
Each PowerMaXX laser
projector includes a full ILDA connector interface, to be controlled with most
existing ILDA compatible interfaces on the market.
All signals can be
adjusted in size and mirror, and the main signal can be routed to the next
projector without using additional splitters or Y-cables.
Digital DMX / LAN interfacing
Each PowerMaXX is equipped with
a DMX playback memory board, plus NetPort LAN interface. If network is used as
control line, the control signal is routed through a 100MBit LAN line, instead of
using the always fragile analog ILDA cables. On the internal memory card,
additional shows can be uploaded, and selected via DMX signals. The total
freedom is yours! The ILDA connector is still available, and is selected
automatically, if an appropriate ILDA signal is given.
Enclosed optical section
The entire optical section of the PowerMaXX is
closed, and shielded against external dirty and dusty air. While foggy or hazy
air is contaminating the optical surfaces very rapidly, PowerMaXX is protected
against any of these "show killers". No forced air, no fans, and no cooling is
required inside the optical chamber. Against other low cost projectors,
PowerMaXX
incorporates a very efficiant heat exchanger, which eliminates the need for
additional cooling. You can easily see this on the missing fans on the top of
the projector chamber. The result is longer lifetime, and maintenance free
operation.
High end laser deflection
For optimum results, each PowerMaXX
incorporates HighEnd galvo systems from CTi. Our outstanding Know How on this
sector guarantees best results in terms of scan speed, precision, and
reliability. In house developed and produced drivers match the speed of the
galvos, and adds full safety features to protect the motor coils against
overpowering.
Easy installation
The installation of the projector in it´s
envionment is as easy as always. The delivered bracket allows an easy
integration into existing truss systems, or the projector is simply placed on a
stable platform. After connecting to a standard power line, PowerMaXX is ready
to go!
 |
 |
 |
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req:
|
>10W RGB
Blue: ~ 2.5W 460nm, Green ~ 4.8W 532nm, Red: ~ 2.8W 639nm
ca. 3mm / <1mrad
60,000pps ILDA
Up to 80° optical
455 x 250 x 295mm
ca. 30kg
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req:
|
>16W RGB
Blue: ~ 4W 460nm, Green ~ 7W 532nm, Red: ~ 5.5W 639nm
ca. 3mm / <1mrad
45,000 pps ILDA (60,000pps opt.)
Up to 80° optical
455 x 250 x 295mm
ca. 32kg
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req: |
>22W RGB
Blue: ~ 5W 460nm, Green ~ 11W 532nm, Red: ~ 6W 639nm
ca. 3mm / <1mrad
60,000pps ILDA
Up to 80° optical
455 x 250 x 295mm
ca. 34kg
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req: |
>12W Green
ca. 3mm / <1mrad
60,000pps ILDA
Up to 80° optical
455 x 250 x 295mm
ca. 30kg
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req: |
>16W Green
ca. 3mm / <1mrad
60,000pps ILDA
Up to 80° optical
455 x 250 x 295mm
ca. 30kg
90-250VAC / 250VA
|
|
