AttaXX Showlaser Projectors - the
most competitive laser projector from MediaLas! Full RGB projectors with
sophisticated features and technology, at a very good price/feature relation!
Made in Germany!
A high efficient heat exchanger covers the optics section from dust and dirt. It
uses superior optical elements for low power losses and better efficiency. Very low noise air fans on side of the housing move silently a constant air flow through the heat exchanger, which can be cleaned easily by using forced air. The very low noise level is highly asked for theater, stages and TV studios. AttaXX offers much much better performance in both aspects: Good optical
efficiency for higher brightness, and no air flow through the optical section.
Therefore, the AttaXX can also be set up in dirty or humid environments.
As all MediaLas projectors, the AttaXX is
entirely designed, produced and assembled in our own production facilities in
Germany. Based on the same lasers as the famous Infinity projector, the AttaXX
offers the same reliability and beam quality, but is reduced in terms of
features. But even in the basic layout, all AttaXX projectors offer a fully
compatible ILDA interface connector, plus a full IEC scanfail safety board.
Optionally, an integration of our DMX memory board or additional LAN interface is
available.
The 2009 AttaXX models can be serviced by a
front service lid with easy access to all optical components. Additionally,
each projection axis can be adjusted on the rear side in projection angle, and can be mirrored
with separate switches, to adopt to any existing environment.
Feature Overview:
-
Laser Power real 1 - 5W
-
High speed graphic galvo scanners
-
Air sealed optical section, no contamination of
optical surfaces
-
Very high efficiency of optical elements
-
First class lasers "Infinity Class"
-
Digital switching power supplies
-
Fully compatible ILDA connector
-
Optional DMX memory board
-
Optional NetPort LAN Interface
-
Low noise air cooling
-
Low power consumption
-
Developed and manufactured in Germany
Downloads:
Control and interface
Each AttaXX laser
projector includes a full ILDA connector interface, to be controlled with most
existing interfaces on the market. In interaction with Mamba, AttaXX will be a
very high quality show laser system at a very good price.
All signals can be
adjusted in size and mirror, and the main signal can be routed to the next
projector without using additional splitters or Y-cables.
Optional DMX / LAN interfacing
As an option, each AttaXX can be equipped with
a DMX playback memory board, or the NetPort LAN interface. If NetPort is
integrated, the control signal is routed through a 100MBit LAN line, instead of
using the always fragile analog ILDA cables. On the internal memory card,
additional shows can be uploaded, and selected via DMX signals. The total
freedom is yours! The ILDA connector is still available, and is selected
automatically, if an appropriate ILDA signal is given.
Enclosed optical section
The entire optical section of the AttaXX is
closed, and shielded against external dirty and dusty air. While foggy or hazy
air is contaminating the optical surfaces very rapidly, AttaXX is protected
against any of these "show killers". No forced air, no fans, and no cooling is
required inside the optical chamber. Against other low cost projectors, AttaXX
incorporates a very efficiant heat exchanger, which eliminates the need for
additional cooling. You can easily see this on the missing fans on the top of
the projector chamber. The result is longer lifetime, and maintenance free
operation.
 |
 |
|
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req:
|
>3.5W RGB
Blue: ~ 1W 450nm, Green ~ 1.5W 532nm, Red: ~ 1W 637nm
ca. 4mm / 1mrad
45,000 pps ILDA (60,000pps opt.)
Up to 70° optical
455 x 260 x 210mm
ca. 24kg / 53 lbs
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req:
|
>2.5W RGB
Blue: ~ 500mW 450nm, Green ~ 1.1W 532nm, Red: ~ 700mW 637nm
ca. 4mm / 1mrad
45,000 pps ILDA (60,000pps opt.)
Up to 70° optical
455 x 260 x 210mm
ca. 24kg / 53 lbs
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req: |
>1.5W RGB
Blue: ~ 350mW 450nm, Green ~ 750mW 532nm, Red: ~ 400mW 637nm
ca. 4mm / 1mrad
45,000 pps ILDA (60,000pps opt.)
Up to 70° optical
455 x 260 x 210mm
ca. 24kg / 53 lbs
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Color Balance:
(approx)
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req: |
>1W RGB
Blue: ~ 300mW 473nm, Green ~ 400mW 532nm, Red: ~ 350mW 652nm
ca. 4mm / 1mrad
45,000 pps ILDA (60,000pps opt.)
Up to 70° optical
455 x 260 x 210mm
ca. 22kg / 53 lbs
90-250VAC / 250VA
|
|
 |
|
|
Laser Power:
Beam Properties:
Scan Speed:
Deflection Angle:
Size:
Weight:
Power Req: |
>5W Green
ca. 3mm / 1mrad
ca. 45,000 pps ILDA (60,000pps opt.)
Up to 70° optical
455 x 260 x 210mm
ca. 23kg / 50.7 lbs
90-250VAC / 250VA
|
|
